What tension should I use for cotton?
Cotton requires a moderate tension setting, usually between three and four. Always start adjusting your tension settings with your upper tension.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why is my top thread so tight?
If the bobbin thread was incorrectly threaded, the upper thread may be too tight. … If the upper thread was incorrectly threaded, the upper thread may be too loose. 4. To increase the upper tension – increase the tension setting or turn the knob to the right.
Probable Causes: – Top or bobbin thread is not set correctly. – Make sure that the bobbin was threaded properly in the shuttle race. …
What is tension force simple definition?
Tension force is the force generated when a load is applied at one or more ends of a material in a directional away, normally to the cross-section of the material. A tension force is often given as a “pulling” force. The load being placed upon the material must be applied axially to be a tension force.