Why can’t I pull the bobbin thread up?
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Make sure the presser foot is up when seating the thread through the upper tension.
How do you pull a bobbin thread?
Hold the top thread to the left and lower the needle (blue arrow) with the hand wheel on the side of the sewing machine. Raise the needle (blue arrow) with the hand wheel, and you will see the bobbin thread (red arrow) get pulled in a little. Gently pull the top thread. This will bring the bobbin thread (red arrow) up.
When threading the lower part of the sewing machine make sure to pull the thread from the little slot of the bobbin How long should the thread be pulled out?
Remove the bobbin from the case and wind the thread. 3. Put the bobbin back to the bobbin case and pull the thread through the little slot at least 4 inches. 4.
Which thread do you hold when trying to get the bobbin thread on the top?
The bobbin thread is looped around the upper thread and can be pulled up. Carefully pull the upper thread upward to pull out the end of the bobbin thread. Pull up the bobbin thread, pass it under the presser foot and pull it about 10 cm (4 inches) toward the back of the machine, making it even with the upper thread.
How do you get the bobbin thread to catch a singer?
Hold the needle thread. Turn the hand wheel slowly towards you to lower and raise the needle. Gently pull the needle thread to pull up the bobbin thread. Pull both threads towards the back of the machine.