Why is my bobbin thread not picking up?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do you get the bobbin thread to catch a singer?
Hold the needle thread. Turn the hand wheel slowly towards you to lower and raise the needle. Gently pull the needle thread to pull up the bobbin thread. Pull both threads towards the back of the machine.
Why is my sewing machine dropping stitches?
Make sure that the thread is in the tension disk and the spool is placed correctly on the machine. Also, double-check to see if the bobbin is in the correct way and threaded tightly. Sometimes, a poorly wound bobbin is the culprit for skipped stitches. Good quality thread also plays a part in nice and even stitching.
Where do you put a threaded bobbin and where does the thread from the bobbin go when the machine is in use?
Insert bobbin counterclockwise
Place your bobbin inside. Make sure the thread unwinds to the left (counterclockwise direction). Guide the thread through the slit in the needle plate cover. This is important because it makes the thread enter the ‘tension spring’ of the bobbin case.