Should you screw or nail corner bead?
Metal corner bead can be installed with nails, screws or staples. When working with wood studs, nails or staples are the easiest method. Screws must be used on metal studs. One challenge with using metal fasteners on metal bead is the tendency for them to push the bead one direction or another.
How do you secure a corner bead?
Nail Corner Bead
Drive a few nails through the holes in the metal strip to establish its position, then nail through the metal for a more secure hold. Don’t twist the bead or press it too tightly as you install it. Space the nails about 8 inches apart along each leg; make sure they are seated firmly.
Can you use vinyl corner bead on inside corners?
The answer, though, is simple: They cheat. They use a rigid material called corner beading, which can be made of metal or plastic. Inside corners don’t need as much protection, so drywallers cover them with regular drywall tape. The process for finishing inside and outside corners is the same.
Which is better metal or vinyl corner bead?
Vinyl beads are inarguably superior to metal beads in two important ways: vinyl is dent-resistant and rust-proof. … In contrast, vinyl beads excel in damp, moisture-prone areas. They are impervious to rust and water damage, so they will stand the test of time without damaging or discoloring the finished wall.
Is vinyl corner bead paintable?
Every new house I’ve ever painted that had bullnose corner bead always used the metal bead. That said, clean vinyl paints well although it might take an extra coat to get good coverage because it’s not as porous as the drywall of joint compound.
Do you tape over vinyl corner bead?
Vinyl Corner Bead
Below is a list of all the ways that vinyl corner beads can be attached to drywall. … Tape is rarely, if ever, used over this kind of bead.